ROBBE Arcus Instructions d'exploitation télécharger pdf (Page 5)

Fig. 7

- The illustration shows the V-tail and linkages mounted on

the fuselage.

Fig. 10

- The picture shows the parts required to fit the wings on the

fuselage.

Fig. 12

- Install the wing retaining plate and fix it to the fuselage

using the screws supplied.

Fig. 11

- Push the left-hand wing panel into the recess in the fuse-

lage, threading the servo lead through at the same time.

Slide the wing joiner through the right-hand side of the

fuselage and into the left-hand wing panel. Now fit the

right-hand wing panel onto the joiner, threading the servo

lead through the opening in the fuselage. Push the wings

together as far as they will go.

Fig. 8

- Trim the aileron servo covers to fit flush in the moulded-in

servo mounts.

10 11 12

Building and Operating Instructions - Arcus V-Tail Prop 1400 No. 2593

Fig. 9

- When the covers are a snug fit, attach them to the wings

using strips of adhesive tape (see illustration).

- Repeat stages 8 and 9 on the other wing panel.

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

ROBBE Arcus Instructions d'exploitation Page 5